Currently unavailable.
We don't know when or if this item will be back in stock.
Added to

Sorry, there was a problem.

There was an error retrieving your Wish Lists. Please try again.

Sorry, there was a problem.

List unavailable.

ANYCUBIC Mega S Upgrade FDM 3D Printer with Extruder and Suspended Filament Rack + Free Test PLA Filament, Works with TPU/PLA/ABS and 8.27''(L) x8.27''(W) x8.07''(H) Print Size

4.2 4.2 out of 5 stars 1,519 ratings

To see product details, add this item to your cart. You can always remove it later.
Brand ANYCUBIC
Material 3D Printers
Color Black
Product Dimensions 16.14"D x 15.95"W x 17.83"H
Item Weight 24.3 Pounds

About this item

  • WORKS OUT OF THE BOX: 3 steps to set up ANYCUBIC Mega S 3D printer with 8 screws and 3 cables for minutes, not only meets fast assembly needs for expert users but also friendly use to beginners. Printing volume reaches 8.27 x 8.27 x 8.07 inches.
  • UPGRADED EXTRUDER DESIGN: Titan extruder provides precise extrusion for your 3D printing with solid filament drive and overall mechanical design compatible with most filaments, greatly reducing the clogging risk and improving printing accuracy. Works with 1.75mm 3D Printer Filament such as TPU, PLA, ABS, HIPS, WOOD, etc.
  • RESUME PRINT & SENSOR DETECTION: Mega S 3D Printer can resume printing after power outage or any other unexpected stoppage.One click to resume from the last recorded position when suffering power outages. And the sensor pauses prints and sets off an alarm when you run out of filament which greatly saves time and cost , printing volume reaches 8.27 x 8.27 x 8.07 inches.
  • ANYCUBIC ULTRABASE: Patented 3D printer printing platform surface coated with patented microporous coating, with excellent adhesion when printing and then effortlessly falls off the bed when it cools to room temp at the end of the print.
  • MORE FUNCTION: ①ANYCUBIC MEGA S is an all-in-one frame 3D printer. The rigid metal frame can minimize the shaking to improve the print quality; ②The double-rod motor is more durable than the traditional clutch motor, does not lose steps, has high precision and more model details can be restored; ③TFT Touch Screen-As responsive as operating on the phone
Serve a springtime stunner
Get ready for Easter Learn more

Product guides and documents

Compare with similar items

This Item
ANYCUBIC Mega S Upgrade FDM 3D Printer with Extruder and Suspended Filament Rack + Free Test PLA Filament, Works with TPU/PLA/ABS and 8.27''(L) x8.27''(W) x8.07''(H) Print Size
ANYCUBIC Mega S Upgrade FDM 3D Printer with Extruder and Suspended Filament Rack + Free Test PLA Filament, Works with TPU/PLA/ABS and 8.27''(L) x8.27''(W) x8.07''(H) Print Size
Recommendations
Anycubic Kobra 2 Pro 3D Printer, 500mm/s High-Speed Printing, High Power Powerful Computing New Structure, Upgraded LeviQ 2.0 Auto Leveling Smart Z-Offset, Print Size 8.7"x8.7"x9.84"
dummy
R QIDI TECHNOLOGY X-PLUS3 3D Printers Fully Upgrade, 600mm/s Industrial Grade High-Speed 3D Printer, Acceleration 20000mm/s2, 65℃ Independent Heated Chamber, CoreXY&Klipper, 11.02x11.02x10.63 inch
dummy
Creality Ender 3 V3 SE 3D Printer, 250mm/s Printing Speed FDM 3D Printers with CR Touch Auto Leveling, Sprite Direct Extruder Auto-Load Filament Dual Z-axis & Y-axis, Print Size 8.66 * 8.66 * 9.84in
dummy
[Original]Anycubic I3 Mega 3D Printer Extruder Print Head
dummy
Official Creality Ender 3 Neo 3D Printer with CR Touch Auto Leveling Kit, Full-Metal Extruder Glass Platform Quick Heat Dissipation with Resume Printing Function Printing Size 8.66x8.66x9.84''
Details
Added to Cart
Details
Added to Cart
Details
Added to Cart
Details
Added to Cart
Details
Added to Cart
PriceCurrently unavailable.-5% $379.99
List:$399.99
$679.00$219.00$19.98$203.99
Delivery
Get it as soon as Sunday, Mar 24
Get it as soon as Sunday, Mar 24
Get it as soon as Sunday, Mar 24
Get it as soon as Sunday, Mar 24
Get it as soon as Sunday, Mar 24
Customer Ratings
Print Quality
3.9
4.0
4.7
3.8
4.8
3.9
Value for money
4.4
3.2
4.7
4.2
3.9
For beginners
3.9
3.8
4.5
3.5
3.7
Tech Support
3.7
3.6
4.7
3.2
3.1
Easy to use
4.3
3.9
4.8
Sold By
ANYCUBIC Official Store
Edify-Technology INC
comgrow
UniTak3D-US
comgrow
compatible material
Acrylonitrile Butadiene Styrene, Polyethylene Terephthalate Glycol, Metal, Thermoplastic Polyurethane, High Impact Polystyrene, Wood, Polylactic Acid
Acrylonitrile Butadiene Styrene, Polyethylene Terephthalate Glycol, Polycarbonate, Thermoplastic Polyurethane, Copper, Alloy Steel, Polylactic Acid
Polyethylene Terephthalate Glycol, Polylactic Acid
Polylactic Acid
file format
STL
STL
OBJ
OBJ, STEP, STL
material
3D Printers
Pla
Alloy,Copper,Pla,Steel
tpu, abs, pla
Metal
Aluminum
connectivity tech
USB
USB
USB
operating system
Windows 7
Linux
Windows 10
Linux
Windows 10
weight
24.25 pounds
20 pounds
15.43 pounds
0.02 kilograms
15.39 pounds

Product Description

3d printer
3d printer

1

About ANYCUBIC

ANYCUBIC has gathered a strong R&D team from domestic to overseas. A simpler, smarter and more practical philosophy has been applied to create high-quality 3D printers to meet professional and daily life needs.

Our goal is “The most popular 3D printer brand” based on quality products and innovative functions, to improve living quality and contribute to social development.

ANYCUBIC Mega S 3D Printer

The Mega S 3D printer is an innovative upgraded printer based on the classic Mega i3 3D printer. You only need to install the material rack, screw 8 screws, and plug in 3 wires to make it work.

  • Technology: FDM (Fused Deposition Modeling)
  • Metal Frame makes 3D Printing more stable
  • High Quality Titan Extruder
  • Machine Weight: ~24.3 pounds

What Can ANYCUBIC Mega S 3D Printer Bring to You?

  • Bring more fun to your child's growth
  • Provide more exquisite decorations for your next parties
  • Replace worn-out parts for the machines you use
  • Provide more excitement and convenience for your life

mega s

3d printer

3d printer

Works out of the Box

3 steps to set up ANYCUBIC Mega S 3D printer with 8 screws and 3 cables for minutes, not only meets fast assembly needs for expert users but also friendly use to beginners.

High Precision and Stability

ANYCUBIC Mega S 3D Printer uses integrated rigid metal body, concise and generous, with tough lines, solid materials, and very stable structure, which can minimize body shaking during printing to improve the printing quality.

Larger Print Volume

Printing size: 210mm x 210mm x 205mm. Larger printing size, smaller machine volume. ANYCUBIC Mega S does its best to gather more high performance and provide more creative space.

3d printer

3d printer

Mega500-6

High Grade Titan Extruder

ANYCUBIC Mega S 3D Printer Equipped with updated Titan extruder, the optimized combination of the classic extrusion system and straight-through V5 extrusion head, provides smooth feeding, not easy to jam, and compatible with flexible filament.

Upgraded ANYCUBIC Ultrabase

The newly upgraded heating integrated lattice printing platform is coated with a patented microporous coating on the surface. Strong adhesion, easy to take molds, rapid and stable heating, it can be used repeatedly without any loss of performance.

Suspended Filament Rack

Black oxidized sheet metal parts with good texture. Mega S 3D Printer adopts integrated suspension design, which is simple and beautiful. The filament feeding is smoother, and the storage and organization are more convenient than others.

3d printer

mega s

MEGA S

Power on Resume Print

ANYCUBIC Mega S 3D Printer supports power on resume print and material interruption detection to avoid wasting time and resources, which means power off and material run out during printing process will not impact your printing result.

TFT Touch Screen

Mega S 3D Printer has 3.5" TFT Touch Screen, user-friendly interface, simple operation, rich functions, smooth operation, one-key switch between Chinese and English, which can provide you a different touch screen experience.

Ideal for STEM Projects

ANYCUBIC 3d printers give students the opportunity to create their own world by their hand, sparking their imagination and innovation. Ideal for helping them do wonders in STEM Projects.

Technical Specifications about ANYCUBIC Mega S 3D Printer

Nozzle Diameter 0.4 mm/1.75mm
Positioning Accuracy X/Y 0.0125mm, Z 0.002mm
Print Speed 20~100mm/s (suggested 60mm/s)
Materials PLA, TPU, ABS, HIPS, PETG, Wood
Operating Temp 8°C - 40°C
Operational Extruder Temp Max 260°C
Operational Print Bed Temp Max 100°C
Connectivity Memory card; Data cable
Software Input Formats .STL, .OBJ, .DAE, .AMF
Slicer Software Cura, Smplify3D, Repetier-HOST
Layer Resolution 0.05-0.3mm
Input Rating 110V/220V AC, 50/60Hz
Printer Dimensions 15.94'' x 16.14'' x 17.83''
Extruder Quantity Single
Software Output Formats GCode
Working Voltage 12V DC
kobra anycubic kobra plus kobra max Vyper 1 kobra max PLA BLACK
Kobra Kobra Plus Kobra Max Vyper Chiron ANYCUBIC 3D Printer PLA Filament
Customer Reviews
3.9 out of 5 stars
497
3.8 out of 5 stars
236
3.9 out of 5 stars
942
4.2 out of 5 stars
562
3.9 out of 5 stars
494
4.4 out of 5 stars
3,396
Printing Technology FDM FDM FDM FDM FDM Color: Black
Build Volume: 8.7" x 8.7" x 9.8" 11.8" x 11.8" x 13.8" 15.7'' x 15.7'' x 17.7'' 9.6" x 9.6" x 10.2" 15.7'' x 15.7'' x 17.71'' Diameter: 1.75 ± 0.02mm
Materials PLA, ABS, PETG, TPU PLA, ABS, PETG, TPU PLA, ABS, PETG, TPU PLA, TPU, ABS, PETG, Wood PLA, TPU, ABS, HIPS, PETG, Wood Material: PLA
Leveling Type: Auto Leveling Auto Leveling Auto Leveling Auto Leveling Semi-auto Leveling Weight: 2.2lbs (1KG)
Layer Resolution: ±0.1mm ±0.1mm ±0.1mm ±0.1mm 0.05-0.3mm Total Length: ~340m
Max.Nozzle Temperature: 260°C 260°C 260°C 260°C 250 °C Nozzle Temp: 190-230°C
Max Heatbed Temp 110°C 90°C 100°C 110°C 100°C Hotbed Temp: No heated/50-80°C
Printing Speed: <180mm/s (recommended 80-100mm/s) <180mm/s (Recommended 80-100mm/s) <180mm/s (recommended 80-100mm/s) <180mm/s (Recommended 80-100mm/s) 20-100mm/s(Recommended 60mm/s) Hardness: HRC105-110

From the brand

Looking for specific info?

Product information

Feedback

ANYCUBIC Mega S Upgrade FDM 3D Printer with Extruder and Suspended Filament Rack + Free Test PLA Filament, Works with TPU/PLA/ABS and 8.27''(L) x8.27''(W) x8.07''(H) Print Size


Found a lower price? Let us know. Although we can't match every price reported, we'll use your feedback to ensure that our prices remain competitive.

Where did you see a lower price?

URL:
Price: ($)
Shipping cost: ($)
Date of the price:
/
/

Store name:
City:
State:
Price: ($)
Date of the price:
/
/


Please sign in to provide feedback.

Customer reviews

4.2 out of 5 stars
4.2 out of 5
1,519 global ratings

Customers say

Customers like the quality of the 3D printer. They say the print comes out great and accurate. They are also happy with value and ease of installation. However, some customers have reported issues with leveling the bed. They also dislike noise and have different opinions on adhesion, performance and quality.

AI-generated from the text of customer reviews

230 customers mention196 positive34 negative

Customers find the installation process of the 3D printer to be easy. They mention that the instructions are very straight forward, the setup is quick, and the printer is beginner friendly. The printer comes near fully assembled and finishing assembly is very easy. It makes learning the ropes easier, and even the owner's manual was clear and helpful.

"...The print quality is outstanding and I love the easy of use.I will chuck this experience up to a fluke and a "lemon" case...." Read more

"...Simple and intuitive. The screws are long and can be a little wobbly so you may want to print something to help hold these in place a little better...." Read more

"Ok, so I'll start with my first impressions. Packaged very well. Easy to assemble, and great looking machine...." Read more

"...The assembly was simple but needed some help to hold parts up from others in order to screw parts in and balancing the printing bed was simple as..." Read more

169 customers mention132 positive37 negative

Customers like the print quality of the 3D printer. They say that the print came out great, the benty printed without an issue, and the print bed on the printer is great. They recommend the software and say it makes beautiful prints. Overall, customers say the printer makes beautiful solid filament prints and is a very good 3D print.

"...The print quality is outstanding and I love the easy of use.I will chuck this experience up to a fluke and a "lemon" case...." Read more

"...Packaged very well. Easy to assemble, and great looking machine. Mine came from Amazon with a dead PSU though...." Read more

"...But the printing was awful. At first, the test print went well as an SD card was included in the box and the test owls came out almost flawless..." Read more

"...I queued it up to print and off I went. The print came out great, for what I consider "Out of the box"...." Read more

95 customers mention85 positive10 negative

Customers like the value of the 3D printer. They mention that it works well for the price, has inexpensive upgrades, and is an impressive unit for the cost and size.

"...It is a great product and VERY affordable for anyone who wants to enter 3D printing arena." Read more

"...Pretty inexpensive upgrades and the printer is now nearly silent...." Read more

"...Pros: Low Price, Ease of assembly, High quality prints, Simple controls and settings, Excellent build quality, Extra parts/tools, Great support,..." Read more

"...-Easy to set up and use-High Quality printing-Not too expensiveCons-..." Read more

210 customers mention144 positive66 negative

Customers are mixed about the performance of the 3D printer. Some mention that it works great, runs into problems very rarely, and generally works well right out of the box. However, others say that it completely stopped working, had a massive failure, and was a defective printer.

"...Positives -Titan extruder that works great with flex filamentsDirect path through bowden to the hot endHeavy duty and compact...." Read more

"...So... the printer. It works well. Though the heated bed doesn't seem to want to play nice with adhesion now...." Read more

"...The heating bed stopped heating up thus consequently rending printer unusable...." Read more

"...A few hundred hours in, and I have absolutely no regrets. The printer works great, runs into problems very rarely, and generally provides a..." Read more

205 customers mention142 positive63 negative

Customers are mixed about the quality of the 3D printer. Some mention that it feels like quality the moment you touch it, it's a great product and VERY affordable for anyone who wants to, and that each material type has performed beautifully on this printer. However, others say that the printer has some poor quality components, it falls apart quickly, and the print quality was awful at first.

"...I stand by what I said earlier about this printer. It is a great product and VERY affordable for anyone who wants to enter 3D printing arena." Read more

"...not have such as a touchscreen, filament runout detection, resume print after power loss and a titan extruder which would certainly help with flex..." Read more

"...Print quality was awful at first, and jams were a regular thing...." Read more

"...help you decide to purchase an Anycubic Mega S. It I a fine piece of machinery and a few basic printed accessories help to make it a little better...." Read more

46 customers mention17 positive29 negative

Customers are mixed about the adhesion of the 3D printer. Some mention that the material has excellent adhesiveness, while the print is on the bed, and the print sticks very well to the build plate. However, others say that they repeatedly ran into issues with adherence to the print bed, with film not sticking. The filament adhedsion is a problem sometimes if the bed is not flat. The cover over the front touch screen doesn't stick to the second case, and sometimes the nozzle tends to stick to parts.

"...printer and tried again, this time it didn’t hit the bed but it didn’t extrude properly and so filament kept flowing inconsistently, creating small..." Read more

"...filament runout detection, resume print after power loss and a titan extruder which would certainly help with flex filaments...." Read more

"...like usual, and leveled the bed, as usual...but....the filament started slipping. Seeing that I've been printing enough to know what was going on...." Read more

"...printer as the second, but we repeatedly ran into issues with adherence to the print bed on my brother's printer...." Read more

60 customers mention15 positive45 negative

Customers have issues with the ease of leveling the 3D printer. They say that it takes some practice and the level of the bed keeps changing.

"...The bed leveling is a bit rough...." Read more

"...The manual leveling was a real pain the first time I did it...." Read more

"...Fortunately, leveling is easy and it's part of my routine now, so I no longer get failed prints...." Read more

"...just not sure what has happened to make it so the level of the bed keeps changing from when I level, to when I print.Good:..." Read more

59 customers mention14 positive45 negative

Customers are not happy with the noise produced by the 3D printer. They mention that the X and S axes are a bit loud, the fans are loud, and the hotend fan sounds like a blender when you turn it on. They also mention that gear skipping sounds and rattling noises are produced.

"...Reviewers of the past mentioned that the cooling fans were very loud, but Anycubic seems to have fixed that problem...." Read more

"...Now for the small negatives. This printer is not quiet. It is certainly not the loudest I have heard...." Read more

"...print from a machine that does not take up a lot of room, is relatively quiet, and is super easy to work with and work on...." Read more

"...The cons are this machine is very noisy out of the box, so much so that I have to close the door to the room it's in as well as our bedroom door so..." Read more

Exceeded my expectations.....
5 Stars
Exceeded my expectations.....
I've been using my AnyCube Mega S for the past couple of days, almost non stop trying prints of different sizes and shapes. Being a sceptic my nature, it took me a long time to finally jump into 3D printing. I have only three words: I am impressed. I bought it mostly so I can print small parts (not trinkets) and the printer comes through. Sure, once you get to a very small size, this printer is not for that. However, for anything within 5 and above millimeters it does just a fine job. A couple of points for those who think about jumping into 3D printing:1. If you did not do it yet, invest in learning computer aided design (commonly known as CAD). Sure, you can scour the web for "ready to print" designs on your 3D printer, but they are not yours and you are limited to what others already "designed". If you are willing to climb the mountain (worth it) and learn CAD, I would strongly recommend FreeCAD (www.freecadweb.org).2. This point is based on #1. Your imaginations is your limit and gratification of using this printer is immense.Over all, this is a very solid 3D printer for those who want to dip their toes in this field. I would highly recommend it to anyone who just is starting.2021-02-14 - Review updateI increased the overall rating to 5 stars. I am also including my first prints. The two cloth pins on the left I done by me in FreeCAD and the remaining prints (Angel the G-clamp) are from www.thethingverse.com.Again, I cannot stress enough how impressed I am by this consumer printer. It is definitely a gateway to other printers providing more fabrication capabilities and quality (as in fine detail) and materials. I would highly recommend it to anyone trying to dip their toes in 3D printing.2021-03-09 - Review UpdateToday was a sad day. After literally 1 month since the purchase of this product, my AnyCubic Mega S went bust. The heating bed stopped heating up thus consequently rending printer unusable. After googling for solutions, it became obvious that I was not the first "victim" of heating bed failure on AnyCubic and it seems to be a frequent occurrence. Hint to AnyCuibc - use BETTER COMPONENTS and improve your quality control.Because the printer is on warranty and I don't feel like tinkering with soldering iron and wires and ripping apart in general a brand new product, I decided to return it and request a replacement. Yes, replacement because this printer is great, in spite of this little set back. The print quality is outstanding and I love the easy of use.I will chuck this experience up to a fluke and a "lemon" case. I hope that the replacement will do much better. I still give it 5 stars.2021-03-12 - Update: Today I received my replacement for the one I just purchased a month ago. I was up and running in less than an hour and finishing my prints I had to stop due to the bed heating failure in my first AnyCubic. After my experience in setting up Sovol SV01, I can assure you that AnyCubic Mega S is a PLEASURE to work with. I missed my clean and very good prints. One thing I have noticed already was that this printer came from a much newer batch than the one I purchased in February. It has a new firmware and updated user interface. I hope, that the bed heating problem related to poor wiring (in my opinion) has been addressed in this release. Time will tell.In all honesty, I believe that AnyCubic Mega S is a very underated 3D printer by other that does not get a lot of attention, but it should. It is a great printer.2021-03-26 - Update: The replacement AnyCubic performs magnificently. I am a little bit apprehensive waiting for April 11th to arrive as this is the "no return" date to Amazon in case something went wrong with the printer. In any case, I am posting another picture of my AnyCubic print. This is a birdhouse that was printed in four separate pieces: 1. Green - support beams. 2. Yellow - base (porch). 3. White - main body. 4. Red - Chimney and perches.All parts are interconnected and slide into each other. If you are interested yourself in printing it, head over to thingaverse.com. It's there. Kudos to the person who designed it.I stand by what I said earlier about this printer. It is a great product and VERY affordable for anyone who wants to enter 3D printing arena.
Thank you for your feedback
Sorry, there was an error
Sorry we couldn't load the review

Top reviews from the United States

Reviewed in the United States on February 11, 2021
Customer image
5.0 out of 5 stars Exceeded my expectations.....
Reviewed in the United States on February 11, 2021
I've been using my AnyCube Mega S for the past couple of days, almost non stop trying prints of different sizes and shapes. Being a sceptic my nature, it took me a long time to finally jump into 3D printing. I have only three words: I am impressed. I bought it mostly so I can print small parts (not trinkets) and the printer comes through. Sure, once you get to a very small size, this printer is not for that. However, for anything within 5 and above millimeters it does just a fine job. A couple of points for those who think about jumping into 3D printing:

1. If you did not do it yet, invest in learning computer aided design (commonly known as CAD). Sure, you can scour the web for "ready to print" designs on your 3D printer, but they are not yours and you are limited to what others already "designed". If you are willing to climb the mountain (worth it) and learn CAD, I would strongly recommend FreeCAD (www.freecadweb.org).

2. This point is based on #1. Your imaginations is your limit and gratification of using this printer is immense.

Over all, this is a very solid 3D printer for those who want to dip their toes in this field. I would highly recommend it to anyone who just is starting.

2021-02-14 - Review update
I increased the overall rating to 5 stars. I am also including my first prints. The two cloth pins on the left I done by me in FreeCAD and the remaining prints (Angel the G-clamp) are from www.thethingverse.com.

Again, I cannot stress enough how impressed I am by this consumer printer. It is definitely a gateway to other printers providing more fabrication capabilities and quality (as in fine detail) and materials. I would highly recommend it to anyone trying to dip their toes in 3D printing.

2021-03-09 - Review Update
Today was a sad day. After literally 1 month since the purchase of this product, my AnyCubic Mega S went bust. The heating bed stopped heating up thus consequently rending printer unusable. After googling for solutions, it became obvious that I was not the first "victim" of heating bed failure on AnyCubic and it seems to be a frequent occurrence. Hint to AnyCuibc - use BETTER COMPONENTS and improve your quality control.

Because the printer is on warranty and I don't feel like tinkering with soldering iron and wires and ripping apart in general a brand new product, I decided to return it and request a replacement. Yes, replacement because this printer is great, in spite of this little set back. The print quality is outstanding and I love the easy of use.

I will chuck this experience up to a fluke and a "lemon" case. I hope that the replacement will do much better. I still give it 5 stars.

2021-03-12 - Update: Today I received my replacement for the one I just purchased a month ago. I was up and running in less than an hour and finishing my prints I had to stop due to the bed heating failure in my first AnyCubic. After my experience in setting up Sovol SV01, I can assure you that AnyCubic Mega S is a PLEASURE to work with. I missed my clean and very good prints. One thing I have noticed already was that this printer came from a much newer batch than the one I purchased in February. It has a new firmware and updated user interface. I hope, that the bed heating problem related to poor wiring (in my opinion) has been addressed in this release. Time will tell.

In all honesty, I believe that AnyCubic Mega S is a very underated 3D printer by other that does not get a lot of attention, but it should. It is a great printer.

2021-03-26 - Update: The replacement AnyCubic performs magnificently. I am a little bit apprehensive waiting for April 11th to arrive as this is the "no return" date to Amazon in case something went wrong with the printer. In any case, I am posting another picture of my AnyCubic print. This is a birdhouse that was printed in four separate pieces:
1. Green - support beams.
2. Yellow - base (porch).
3. White - main body.
4. Red - Chimney and perches.

All parts are interconnected and slide into each other. If you are interested yourself in printing it, head over to thingaverse.com. It's there. Kudos to the person who designed it.

I stand by what I said earlier about this printer. It is a great product and VERY affordable for anyone who wants to enter 3D printing arena.
Images in this review
Customer image Customer image
Customer imageCustomer image
10 people found this helpful
Report
Reviewed in the United States on February 3, 2020
One person found this helpful
Report

Top reviews from other countries

Translate all reviews to English
Ashok A.
5.0 out of 5 stars Very good machine at this rate
Reviewed in India on August 5, 2022
One person found this helpful
Report
Uinguiston Nunes Camargo
5.0 out of 5 stars Satisfeito
Reviewed in Brazil on January 16, 2020
4 people found this helpful
Report
Bharat varma
4.0 out of 5 stars Nozzle clogging
Reviewed in India on August 30, 2022
2 people found this helpful
Report
Cliente Kindle
1.0 out of 5 stars Ruim
Reviewed in Brazil on April 24, 2020
2 people found this helpful
Report
kk
3.0 out of 5 stars 3 d printer
Reviewed in India on December 1, 2020
7 people found this helpful
Report