got the chair so I could use it at a work table that I raised using to use as a standing desk using these:
https://www.amazon.com/Utopia-Bedding-Premium-Adjustable-Furniture/dp/B073WFCV1L/ref=pd_rhf_ee_s_rp_c_2_4?pd_rd_w=ZhlVH&pf_rd_p=454eda66-575d-4584-9511-fd768a5c8a77&pf_rd_r=M0GKNB8BNDE08YAK8796&pd_rd_r=3d65db47-c61f-49ef-91cf-5bd6f298eec4&pd_rd_wg=CKtu8&pd_rd_i=B073WFCV1L&psc=1
I also wanted to be able to use it as a standard desk as well.
Does not go as low as I thought but low enough to be at a desk height that is not an uncomfortable sitting position (arms mostly level for me to have my elbows at a right angle while typing.
Seat pad is well cushioned, I do not feel the solid area under the pad. The foot rail is sturdy, one of the reason I bought this one is the others' foot rail all seemed too wimpy for me., and I read that was the case in other chair reviews.
went together quite easily, all holes lined up enough to get it together without any severe adjustments. REMEBER leave screws loose until they are all in the holes and not cross threaded, There is a bit of locktite on each one as to not allow them to back out so you will feel a tiny bit of bit bit of resistance but it is tiny, if it feels too much back out and try again. Everything is heavy duty plastic and will bend a tad to adjust the holes as needed, except the base to the seat cushion but the holes in the metal base are slotted enough to make up for the misalignment you get in cheap goods from china . Jiggle the pieces you are putting together to allow you to get the screws in finger tight to ensure no cross-threading, they are fine threads and I get could easily be stripped
There are extra bits of hardware in case you lose a few thing, nice with how these small things always seem to get lost on me.
Seat overhang area is padded to very comfortable when you sit back or hang your legs and let them swing.
Back lumbar curve sticks out a lot but you can push back on it and it gives (there is NO back tilt and the tilt know on the bottom was a pain to adjust and only tilted the whole seat back ant that raised the front of the pad to an uncomfortable pitch (for me at lease) I tend to sit off the rear of the seat anyway while I am working.
Time will tell how ling it lasts and How comfortable it will be for a full day of work. I will update after I have done that.
| Brand | Flash Furniture |
|---|---|
| Color | Dark Gray |
| Product Dimensions | 27"D x 27"W x 49.5"H |
| Size | Set of 1 |
| Back Style | Curved |
| Special Feature | Adjustable |
| Product Care Instructions | S-Solvent based cleaner - no water |
| Unit Count | 1.0 Count |
| Recommended Uses For Product | Drafting |
| Style | Drafting Chair |
| Pattern | Solid |
| Finish Type | Painted |
| Room Type | Home Office/Study;Office |
| Age Range (Description) | Adult |
| Included Components | Drafting Stools |
| Model Name | Flash Furniture |
| Arm Style | Adjustable |
| Surface Recommendation | Hard Floor |
| Seat Back Interior Height | 21 Inches |
| Furniture base movement | Swivel |
| Indoor/Outdoor Usage | Indoor |
| Furniture Finish | plastic |
| Seat Height | 29 Inches |
| Seat Depth | 19 inches |
| Fill Material | Foam |
| Tilting | Yes |
| Is Customizable | Yes |
| Number of Cup Holders | 1 |
| Item Weight | 34 pounds |
| Country of Origin | China |
| Item model number | BL-ZP-8805D-DKGY-GG |
